Loomis · Placer County · PG&E & Pioneer Territory

Loomis Homeowners
Are
Done Overpaying
PG&E.

Lock in lower energy rates with $0-down solar — and keep your well pump, home, and outbuildings running when the grid goes out.

  • ✓No credit pull to check eligibility

  • ✓Quote to install in as little as 30 days

  • ✓Licensed, local & rated 4.8★by California homeowners

Pioneer Community Energy Customers GridGen-eligible: Solar + Powerwall 3 — $0 upfront, billed on your utility bill

📞 (209) 216-8180

🔒 No spam*No credit pull*Local follow-up within 1 hour * CSLB #1065773

📍
Not in this area? We serve 16 communities across Northern and Central California — find your city and utility below.
See All Service Areas →
PG&E & Pioneer Community Energy Customers

Loomis Gets More Sun Than
Almost Anywhere in Placer County.
Your Utility Bill Shouldn't Show It.

Loomis and the surrounding Placer County foothills average 5.7 peak sun hours per day — exceptional solar production for Northern California. Yet homeowners here are paying some of the highest residential PG&E rates in the state, with bills that spike in summer when central AC runs hardest and well pumps cycle constantly. In 2026, Loomis homeowners have more solar options than ever — including a Pioneer Community Energy program that installs solar and a Powerwall 3 on your roof for $0 upfront, billed directly on your existing utility bill.

☀️
5.7
Peak sun hours per day
📈
40%+
PG&E rate increase — last 4 years
🏠
9–14kW
Typical Loomis system size
$0
Upfront via GridGen or PPA
PG&E Rate Reality for Placer County
Why Loomis homeowners are acting now

PG&E residential rates in Placer County have increased over 40% in the last four years — and more increases are approved through 2026. Time-of-use plans mean you're paying peak rates every evening from 4–9pm, exactly when your home draws the most power after the solar day ends. A properly-sized system with battery storage eliminates that exposure entirely. Loomis homeowners with well pumps, pools, outbuildings, and EV chargers see the strongest returns because higher usage means more savings per panel.

🌲
Pioneer Community Energy & GridGen
A program most solar companies don't know exists

Most Loomis residents are Pioneer Community Energy customers — a Community Choice Aggregator serving Placer and El Dorado counties. Pioneer's GridGen program allows eligible homeowners to install solar panels and a Powerwall 3 battery with zero upfront cost and no credit underwriting. The cost is added as a line item on your existing utility bill — no separate lender, no separate payment. Equipment specs, rates, and terms are confirmed at enrollment through Pioneer.

⚡ GridGen-eligible territory
Solar With Watts Serves Loomis, Penryn, Newcastle & Placer County

Solar With Watts is a California solar sales and home energy company serving homeowners in Loomis, Penryn, Newcastle, Rocklin, and throughout Placer County. We help PG&E and Pioneer Community Energy customers reduce their monthly utility bills with $0-down solar panels, home battery systems, and roofing replacement — designed around your actual property, usage, and utility rate structure. Whether you're on a PG&E time-of-use plan with rural property loads or a Pioneer Community Energy customer eligible for the GridGen solar program, we build systems that work for your specific situation. Every homeowner gets a transparent proposal, a no-credit-pull eligibility check, and a licensed installation through our EPC partner Solar Savings Direct (CSLB #1065773). Most projects go from signed agreement to powered-on system in typically 30–45 days.

Get My Free Loomis Estimate
No credit pull  ·  No obligation  ·  Local follow-up within 1 hour
Your Options — No Upfront Cost Required
Five Ways Loomis Homeowners
Go Solar for $0 Down.

Every Loomis property is different — rural loads, roof orientation, Pioneer vs. PG&E billing, and system size all factor in. We show you every option side by side with real numbers before you decide anything.

Pioneer Exclusive
GridGen Program — Pioneer Community Energy
Solar + Powerwall 3 — Billed on Your Utility Bill

If you're a Pioneer Community Energy customer in Loomis, you may qualify for GridGen — a program that installs solar panels and a Powerwall 3 battery on your home with $0 upfront and no credit check. The cost is added as a line item on your existing monthly utility bill. No separate lender, no separate payment. System configuration, equipment, and pricing are confirmed at the time of your quote through Pioneer's program.

📋 GridGen is a Pioneer Community Energy program. Equipment specs, rates, and terms are set by Pioneer and confirmed at enrollment. Learn more at Pioneer's website →
☀️
$0-Down Power Purchase Agreement
Lightreach · GoodLeap · EnFin

A third party owns the panels. You pay only for the electricity they produce at a rate lower than PG&E charges. No upfront cost, no ownership responsibility, no maintenance. Rate and terms confirmed at time of quote.

  • $0 down — nothing to pay to get started
  • Lower rate than your current PG&E bill
  • No credit pull to check eligibility
  • Multiple PPA providers — we shop on your behalf
  • Transfers to new buyer if you sell your home
Check PPA Eligibility →
📄
Low-Interest Solar Financing
Own Your System Outright

Finance your system and own it from day one. Monthly payments are typically less than your current PG&E bill. Owned solar increases your Loomis property value. Rate and terms based on credit qualification at time of quote.

  • Own your system — builds home equity
  • Competitive APR with qualifying credit
  • Payments often less than current bill
  • Increases Loomis property resale value
  • Multiple lenders — best rate shopped for you
See Financing Options →
🔋
Solar + Home Battery
Tesla Powerwall · SolarEdge · Enphase

Add a home battery to keep your well pump, home, and outbuildings running during Placer County PSPS outages — no generator needed. Store midday solar for expensive evening TOU peak hours. Battery options and pricing confirmed per system design.

  • Well pump backup during grid outages
  • Discharge during evening peak TOU hours
  • PSPS protection for Placer County foothills
  • Bundle pricing — cheaper than adding later
  • Sized to your property and usage at time of design
Explore Battery Options →
🌾
Loomis Rural Property Loads — We Size for Your Whole Property

Most solar companies size systems for a home's base electricity usage. For Loomis rural properties that approach undersizes the system. We account for well pump cycling, outbuilding circuits, agricultural equipment, EV chargers, and pool or spa loads when designing your system. Getting this right from the start means maximum savings and a system that actually covers your property.

Savings Estimator
What Could Your
Loomis Property Actually Save?

A PPA typically reduces your energy cost significantly compared to your current PG&E bill. Loomis homeowners with higher bills from rural property loads tend to see stronger savings. Exact numbers confirmed at time of quote — this calculator gives you a realistic ballpark.

📋 Estimates only. Actual savings depend on your roof, shading, system design, and PPA terms confirmed at quote. A free estimate gives you exact numbers for your specific property.
Select your average monthly PG&E bill:
← Select your bill range
estimated monthly savings
*Estimates only. Actual results vary and are confirmed at time of quote.
Get My Exact Numbers →
Free · No credit pull
60 seconds
See Which Program Makes Sense
For Your Loomis Property.

60 seconds. No credit pull. No obligation. We'll show you every option — including GridGen if you're a Pioneer customer — side by side with real numbers. Local follow-up within 1 hour.

See What My Home Qualifies For
🔒 No spam  ·  No credit pull  ·  Free
Simple Process — No Surprises
From Estimate to Powered-On
Typically in 30–45 Days.

Most Loomis homeowners are surprised by how straightforward this is. Here's exactly what happens from your first conversation to the day your system goes live.

30–45
Days Typical
📋
Step 01

Free Estimate

Submit your info in 60 seconds. We map your roof, review your PG&E usage, check Pioneer GridGen eligibility, and show you every option side by side — no credit pull.

Day 1
Step 02

Review & Sign

We walk through your proposal together — all options compared side by side. No pressure. When it makes sense for your property, you sign digitally and we file permits immediately.

Days 2–7
🔧
Step 03

Installation Day

Solar Savings Direct's licensed crew handles the full install — panels, inverter, battery if included, and all wiring. Rural Loomis properties are typically completed in one visit.

Days 14–30
Step 04

Permission to Operate

PG&E grants PTO and your system goes live. Every sunny Placer County day now powers your home, well pump, and outbuildings — and your meter runs in your favor.

Days 25–45
📄
What's in Your Proposal
No bait and switch — ever

Your proposal shows your current PG&E bill vs. your projected new payment for every option — prepaid lease, PPA, GridGen, and financing side by side. System size, equipment, and total cost all visible before you sign anything.

  • All options compared in one view
  • Current vs. projected bill side by side
  • Full property load accounted for — well pump, outbuildings
  • GridGen eligibility confirmed for Pioneer customers
  • Numbers don't change at contract — ever
🏠
What Happens on Install Day
CSLB #1065773 — licensed crew

Solar Savings Direct's crew arrives, completes the full installation in a single visit, and leaves your property clean. Rural Loomis installs — including large systems with batteries — are typically done in one day.

  • Panel mounting on your roof structure
  • Inverter installation — garage or utility area
  • Battery installed same day if included
  • PG&E meter upgrade handled by the utility
  • Full system walkthrough before crew leaves
📍
A Note on Placer County & Pioneer Timelines

Placer County permits typically return in 7–14 business days for Loomis zip codes (95650). PG&E interconnection typically runs 5–10 days after inspection. For GridGen installations through Pioneer Community Energy, the enrollment step adds approximately 3–5 business days. Overall timelines typically run 30–45 days from signed agreement to Permission to Operate — we give you a realistic schedule for your specific address, not a best-case estimate.

Ready to Get
Your Project Started?

Your free estimate is Step 1. Takes 60 seconds, no credit pull, and we follow up within 1 hour with real numbers — including GridGen eligibility — for your Loomis property.

Get My Free Estimate
🔒 No credit pull  ·  No spam  ·  Free
Verified California Homeowner Reviews
Real Homeowners.
Real Results.

From Placer County foothills to the Central Valley — here's what homeowners say after going solar with our team.

★★★★★
4.8 / 5
Google · Verified
★★★★★
Google
"I was skeptical at first — but Ed showed me exactly what my bill would look like before and after, walked me through every option, and never pressured me once. Our first bill after install was $22. I've been telling every neighbor I have."
DM
David M.
Rocklin · PG&E · Solar + Battery
📍 Placer County
★★★★★
Google
"No pressure, no gimmicks — just clear answers about what my bill would look like after solar. We're saving about $160 a month. Ed walked me through every step and the process was smooth start to finish."
SR
Scott R.
El Dorado Hills · PG&E Customer
📍 El Dorado County
★★★★★
Google
"The estimate was accurate, no surprises at contract, and our bill dropped immediately after Permission to Operate. The whole process was easier than I expected — and faster than most contractors we've dealt with."
MR
Maria R.
Loomis · PG&E Customer
📍 Loomis, CA
🏆
CSLB Licensed
EPC Partner #1065773 — verified CA contractor
GridGen Partner
Pioneer Community Energy program specialist
🔒
No Credit Pull
Zero impact to check eligibility
📞
1-Hour Response
Real local follow-up — not a call center
Join Placer County Homeowners
Already Saving Every Month.

60 seconds. No credit pull. No obligation. Get a custom solar plan built around your Loomis property — including GridGen eligibility check if you're a Pioneer customer. Local follow-up within 1 hour.

See What My Home Qualifies For
🔒 No spam  ·  No credit pull  ·  Free
Loomis Solar — Common Questions
Straight Answers for
Loomis Homeowners.

Questions specific to PG&E and Pioneer Community Energy customers in Loomis and Placer County — no fluff, no sales pitch.

Get My Free Estimate →
No credit pull · 60 seconds
Yes — Loomis is one of the stronger solar markets in Placer County. The Sierra Nevada foothills average 5.7 peak sun hours per day, PG&E rates have risen over 40% in four years, and rural properties here typically carry higher energy loads from well pumps, outbuildings, and agricultural equipment — all of which improve solar ROI. Most Loomis homeowners see payback periods of 6–8 years with owned systems. See what your property qualifies for →
GridGen is a Pioneer Community Energy program that installs solar panels and a Powerwall 3 battery on your home with $0 upfront and no credit check. The cost is added as a line item on your existing monthly utility bill — no separate lender, no separate payment. Equipment specs, rates, and terms are set by Pioneer and confirmed at enrollment. To qualify you must be a Pioneer Community Energy customer in good standing, own your home, and agree to a 25-year term. Most Loomis zip codes (95650) are in Pioneer territory. We confirm eligibility as part of your free estimate. Learn more at Pioneer's website →
Most Loomis residents receive electricity delivered by PG&E but generated through Pioneer Community Energy — a Community Choice Aggregator serving Placer and El Dorado counties. Your utility bill will show Pioneer Community Energy as your generation provider if you're enrolled. For solar purposes, Pioneer territory customers have access to the GridGen program in addition to all standard PPA and financing options. We confirm your utility provider as part of your free estimate.
Prepaid lease: You pay 30% less than the full system cost at signing — the ITC discount passes directly to you. After 5 years, full ownership transfers to your home at no additional cost. No tax filing required. Best long-term value for homeowners who want a path to ownership.

PPA: A third party owns the panels permanently. You pay only for the electricity they produce at a rate lower than PG&E. $0 down, no ownership, no maintenance. Best for homeowners who want maximum bill reduction with zero upfront investment. We show both side by side in your proposal. Compare options for your property →
Yes — and this is one of the most important things to get right for Loomis rural properties. Well pumps, workshops, barns, and agricultural equipment all add to your total property load, and a system sized only for your home's base usage will underperform. We account for your full property load when designing your system — including well pump cycling, outbuilding circuits, and any EV or equipment charging. Getting this right from the start means your system covers your actual usage rather than leaving gaps.
Not required, but strongly recommended for Loomis rural properties. Loomis and the surrounding Placer County foothills experience PSPS outages during fire weather events — without a battery, your solar system shuts off when the grid goes down. A home battery keeps your well pump, refrigerator, and essential loads running during outages without a generator. Under NEM 3.0, a battery also maximizes self-consumption by storing midday solar for expensive evening TOU peak hours. Battery options include Tesla Powerwall, SolarEdge, and Enphase — sized and priced per your system design at time of quote.
Most Loomis installations go from signed agreement to Permission to Operate in typically 30–45 days, depending on Placer County permit processing and PG&E interconnection queue. Placer County permits typically return in 7–14 business days. PG&E interconnection runs 5–10 days after inspection. For GridGen installations through Pioneer, the enrollment step adds approximately 3–5 business days. The physical installation is typically completed in a single day by our licensed EPC partner Solar Savings Direct (CSLB #1065773). We give you a realistic timeline for your specific address when we build your proposal.
Most Loomis homes require 9–14 kW systems — larger than typical suburban quotes because rural properties carry higher loads. Properties with well pumps, pools, EV chargers, or working outbuildings often need 14–18 kW. We run a full energy analysis based on your actual PG&E bills and your total property load — not a generic calculation. Your custom quote is free and comes with no obligation. Get your custom system size →
Prepaid lease / owned system: Owned solar typically increases your property's resale value. Rural Loomis properties with solar and battery backup are increasingly attractive to buyers who value energy independence and PSPS protection.

PPA: The agreement transfers to the new buyer as part of the home sale — many buyers see this as a benefit since they get immediate bill savings with no upfront cost.

GridGen: The 25-year Pioneer agreement transfers with the property. The new buyer takes over the utility bill line item. We walk you through what buyers need to know during escrow for any program. Ask us anything during your free estimate →
A few things that matter specifically for Loomis: we understand rural property loads and size systems to cover your full property — not just a suburban base usage estimate. We know the Pioneer Community Energy GridGen program and confirm eligibility for your specific address. When you submit your info you're talking to Ed directly — not a call center. Our EPC partner Solar Savings Direct holds CSLB license #1065773 — verifiable at the California contractor board. 4.8 stars across 250+ verified installs. Free estimate, no pressure →
Still Have a Question
We Didn't Cover?

Get your free Loomis estimate and ask us anything on the call — GridGen eligibility, rural property sizing, Pioneer vs. PG&E billing, or anything else. No pressure, no pitch.

Also Serving Pioneer Territory
Other Foothills Communities We Serve

Loomis sits inside the PG&E + Pioneer Community Energy dual-billing zone — and so do your neighbors. Same GridGen eligibility, same rate structure, same solar strategy.

Every Month You Wait
Is Another Month
Overpaying PG&E.

PG&E rates in Placer County have increased over 40% in four years — and more increases are approved through 2026. Loomis homeowners who locked in solar two years ago are already insulated from every one of those hikes. The cost to find out if your property qualifies is zero.

📈
PG&E rate increases are approved through 2026. Every month without solar is a month paying the higher rate — on your home, your well pump, and every load on your property. If you're a Pioneer Community Energy customer, GridGen eligibility is subject to program availability. A free estimate takes 60 seconds and costs nothing.
🔒 No credit pull
📞 1-hour local follow-up
✅ No obligation
⚡ 60 seconds

Not ready to submit? Start here instead.
☀️
Ready for a Free Estimate

Submit your info in 60 seconds. We'll build a proposal around your actual PG&E usage and full property load — including GridGen eligibility if you're a Pioneer customer.

Start My Free Estimate →
📘
Not Ready Yet — Get the Free Guide

Download the 2026 California Homeowner's Solar Guide first. Plain-English breakdown of NEM 3.0, PPA vs. prepaid lease, GridGen, and how to read your PG&E bill before talking to anyone.

Download Free Guide →
🔋
Interested in Home Battery Backup

Learn about solar + battery systems that keep your Loomis home, well pump, and property running during Placer County PSPS outages. Tesla Powerwall, SolarEdge, and Enphase options available.

Explore Battery Options →
Prefer to Talk First?
Call or Text Ed Directly

Real person, not a call center. Available Mon–Fri 8am–6pm, Sat 9am–3pm.
Ask about GridGen eligibility, rural property sizing, or anything else about your Loomis home.

Sales by Watts Home Services LLC · Installation by Solar Savings Direct (EPC Partner) · CSLB #1065773 — Verify License ↗ · Serving Loomis, Penryn, Newcastle & Placer County